|
64-73 Brake/gas line clip
Can$4.50
380374S
Exact copy of the hard to find original. This two piece clip is used to mount gas and/or brake line to floor pans.
|
|
Bumper Sticker - My Other Car Is A Classic Mustang
Can$3.85
BS74
|
|
64-70 front wheel stud
Can$4.50
C3AZ1107A
Each
|
|
|
64-73 front RH wheel cylinder
Can$34.50
C3OZ2061B
All brand new cylinders, American made, quality castings and parts.
Notes :
Fits only : 260, 289, 302, 351,390, 428, right hand
|
|
64-73 front LH wheel cylinder
Can$34.50
C3OZ2062B
All brand new cylinders, American made, quality castings and parts.
Notes : Fits only : 260, 289, 302, 351,390, 428, LH
|
|
64-70 front RH wheel cylinder
Can$35.00
C5DZ2061A
Fits only : 170,200 6 cylinder, 1-1/16" bore, right hand
|
|
64-70 front LH wheel cylinder
Can$35.00
C5DZ2062A
Fits only : 170,200 6 cylinder, 1-1/16" bore, left hand
|
|
64-73 rear wheel stud
Can$5.25
C5ZZ1107A
Each
|
|
|
9" front hold down kit
Can$19.50
C5ZZ2035AK
1964-73 Brake Spring / Hold Down Kit 9in.,Front
These kits contain all the replacement springs and hold downs required to do a professional job on drum brakes. Kit includes enough parts for two wheels. Each
|
|
|
9" rear hold down kit
Can$19.50
C5ZZ2035BK
64-70 Brake Spring / Hold Down Kit (9",Rear)
These kits contain all the replacement springs and hold downs required to do a professional job on drum brakes. Kit includes enough parts for two wheels. Each
|
|
|
10x2 front or rear hold down kit
Can$19.50
C5ZZ2035CK
These kits contain all the replacement springs and hold downs required to do a professional job on drum brakes. Kit includes enough parts for two wheels.
Notes :
Front or Rear 10"x2" diameter
Each
|
|
10x1 3/4 rear hold down kit
Can$19.50
C5ZZ2035DK
These kits contain all the replacement springs and hold downs required to do a professional job on drum brakes. Kit includes enough parts for two wheels.
Notes :
Rear 10"x1.75" diameter
Each
|
|
65-70 9" adj kit RH
Can$19.50
C5ZZ2041AK
These kits contain all the parts necessary to refurbish the self adjusting mechanism on drum brakes. Includes new cable and guide, ratchet, spring, and all necessary small parts. Kits include everything for one wheel.
Notes :
R.H. Front or rear 9” dia.
|
|
65-70 9" adj kit LH
Can$19.50
C5ZZ2041BK
kit
|
|
65-73 10" adj kit RH
Can$19.50
C5ZZ2041CK
kit
|
|
65-73 10" adj kit LH
Can$19.50
C5ZZ2041DK
kit
|
|
Brake Pedal pad 64-73 M/T
Can$6.75
C5ZZ2457G
These exact reproduction pads are made of high quality EPDM rubber. Perfect to replace worn or missing original pads.
|
|
|
64-73 brake prop valve
Can$102.75
C5ZZ2B091R
This aftermarket proportioning valve is far superior to the original equiptment. Fully adjustable for tuning front and rear brake bias. Requires some routing modifications of brake lines for proper fit. Includes adapter fittings. Each
|
|
67-73 rear wheel cylinder 7/8" bore
Can$35.00
C60Z2261A
200/250/289/302 ea, RH
|
67-73 rear wheel clylinder LH. 7/8"
Can$35.00
C60Z2262A
200/250/289/302 ea, LH
|
68-73 drum brake pedal pad auto transmission
Can$10.50
C6OZ2457A
These exact reproduction pads are made of high quality EPDM rubber. Perfect to replace worn or missing original pads.
|
|
68-70 Brake Pedal pad trim auto transmission
Can$19.50
C6OZ2A487A
ea
|
|
67-70 Parking Brake Equalizer
Can$27.00
C6OZ2A602A
A nice reproduction. Zinc plated stamped.
|
67-70 Paking brake cable conne
Can$9.75
C6OZ2A790A
Parking Brake Cable Connector
Notes :
6 & 8 cylinder
|
67-3 Disc Brake M/C Cap Gold Cadmium
Can$24.75
C7AZ2162B
Now made by Scott Drake. Our caps feature exact letter stamping detail on top. Rubber diaphragm and bail wire included. Gold cadmium finish like original.
|
|
67-73 Master Cylinder Cap diaphragm Disc Brake
Can$8.25
C7AZ2167A
Drum brakes with 5 1/2 inch cap
|
|
|
67-72 master cyl diaphram
Can$8.25
C7AZ2167B
Drum brake with 5" cap. ea
|
|
67-70 front drum brake hose
Can$30.00
C7ZZ2078AR
These original style hoses feature factory specification fittings. Made in the U.S.A.
Notes :
All Engines, R.H. and L.H. Sold Each
|
67-73 Parking Brake Cable Idler
Can$16.50
C7ZZ2A808A
Parking Brake Cable Idler
Notes :
6 & 8 cylinder
|
68-70 disc brake hose RH
Can$59.25
C8ZZ2078AR
Original equipment style hoses feature Ford Spec fittings. Quality American made replacements.
|
68-70 disc brake hose LH
Can$59.25
C8ZZ2078BR
Original equipment style hoses feature Ford Spec fittings. Quality American made replacements.
|
|
67-72 Master Cylinder Power disc brakes
Can$116.25
C8ZZ2140AR
Each
|
|
68-70 LH Rear Emergency Brake Cable (6 cyl)
Can$49.50
C8ZZ2A635CR
Each
|
|
68-73 disc caliper rebuild kit
Can$37.50
C8ZZ2B120HK
Each
|
|
|
68-73 disc cali boot/seal kit
Can$15.00
C8ZZ2B120SK
Includes all new piston seals and dust boots. Each kit contains the parts for one caliper assembly. For the less adventurous, we also offer rebuilt calipers on an exchange basis.
Notes :
Boots and Seals Only
|
|
|
67-70 Master Cylinder Drum Brakes
Can$91.50
C9AZ2140DR
Each
|
|
67-73 Master Cylinder Caps. GOLD
Can$22.50
C9AZ2162B
For power drum brake applications but will fit some non-power master cylinders. Correct bail and diapragm included.
|
67-73 Master Cylinder Cap (Disc Brakes, Chrome)
Can$32.25
C9AZ2162C
Our caps feature exact letter stamping detail on top. We finished this cap with bright chrome to catch the eye. Rubber diaphragm and chrome bail wire included
|
68-73 Disc brake dust shields
Can$114.87
C9OZ2K004A
Some times called backing plates, this is a pair of shields that fit stock disc brake cars
[View Cart]
|
brake lamp switch
Can$12.75
C9ZZ13480A
Each
|
67-70 brake lamp switch Power brakes
Can$12.75
C9ZZ13480B
Each
|
|
69-73 park brake pedal pad
Can$9.75
C9ZZ2454
ea
|
|
69-70 front park brake cable
Can$54.75
C9ZZ2853AR
Each
|
70 rear brake hose
Can$60.75
D0ZZ2282AR
Each
|
|
70 emergency brake
Can$111.75
D0ZZ2780A
Complete assemblies as sold from Ford. Good reproductions includes rubber pad pedal
|
|
1970-3 Rear Emergency Brake Cable 8 cyl. LH
Can$75.00
D0ZZ2A635BR
Fits from equalizer to rear brakes. 1 Req, 8 cyl, L.H
Each
|
|
65-73 brake pedal pad trim manual transmission
Can$19.50
D1ZZ2A487B
ea
|
|
68-73 DISC BRAKE PAD A/T
Can$21.00
D3ZZ2454A
These reproduction pads are high quality replacements for worn or missing original pads
|
68-73 Brake pedals auto trans
Can$204.00
DBCA21184
This pedal required when switching over to factory power brakes. This pedal is not required when using our power brake conversions.
Notes :
Auto trans (Factory Power Brakes)
|
68-73 Brake Pedal Manual trans
Can$204.00
DBCA21185
This pedal required when switching over to factory power brakes. This pedal is not required when using our power brake conversions.
Notes :
Manual trans (Factory Power Brakes)
|
1967-70 Power Brake Conversion Auto with Disc brakes
Can$455.00
Now available the safety and increased stopping power you have been looking for on any 1964 - 1970 Mustang in a very easy to install unit. This setup utilizes a new American made Bendix power brake booster with increased sensitivity and a 5 year warranty,* new large capacity dual chamber master cylinder, specially designed mounting bracket to allow direct bolt in while retaining original brake pedal assembly and clearance of the shock tower. The push rod is preset but is adjustable to move the pedal height up or down. The only modification necessary is bending new lines from the master cylinder to the distribution block. See below for brake lines to simplify the installation. We also offer a rebuilt distribution block part number C7ZZ-2B257-A which is not included in the Power Brake Conversion. This part may be required depending on what your car is currently equipped with. 1967-1970 cars already have one from the factory but it is a good idea to replace it. This kit is easy to install. This is a very economical solution for Those looking for an improved braking system along with the added safety of a dual chamber master cylinder. Note: Booster requires a minimum 15 pounds of engine vacuum pressure at idle for maximum stopping power. Some high performance high lift camshafts may not create enough vacuum. Stock engine vacuum pressure is 18 pounds. *5 year warranty on Booster only. 1 year warranty on Master Cylinder.
|
67-70 Power Brake Conversion Auto w/drum brakes
Can$455.00
PBC672
Now available the safety and increased stopping power you have been looking for on 1967 - 1970 Mustang in a very easy to install unit. This setup utilizes a new American made Bendix power brake booster with increased sensitivity and a 5 year warranty,* new large capacity dual chamber master cylinder, specially designed mounting bracket to allow direct bolt in while retaining original brake pedal assembly and clearance of the shock tower. The push rod is preset but is adjustable to move the pedal height up or down. The only modification necessary is bending new lines from the master cylinder to the distribution block. See below for brake lines to simplify the installation. We also offer a rebuilt distribution block part number C7ZZ-2B257-A which is not included in the Power Brake Conversion. This part may be required depending on what your car is currently equipped with. 1967 - 1970 cars already have one from the factory but it is a good idea to replace it. This kit is easy to install. This is a very economical solution for those that are looking for an improved braking system along with the added safety of a dual chamber master cylinder. Note: Booster requires a minimum 15 pounds of engine vacuum pressure at idle for maximum stopping power. Some high performance high lift camshafts may not create enough vacuum. Stock engine vacuum pressure is 18 pounds. *5 year warranty on Booster only. 1 year warranty on Master Cylinder.
|
Power Brake Vacuum Booster Lines / 68-70 / power brakes, Boss 302, 351 W, or 302
Can$27.00
ZBV6803
|
68-70 / power brakes, Boss 302, 351 W, or 302 / Power Brake Vacuum Booster Lines
Can$36.00
ZBV6803SS
|
Front to Rear Brake Lines / 70 / Drum brakes, assembled with 1970 rear axle
Can$66.00
ZIN7001
Quality lines with correct fittings.
|
70 / Drum brakes, assembled with 1970 rear axle / Front to Rear Brake Lines
Can$100.00
ZIN7001SS
Quality lines with correct fittings. SS means Stailess Steel construction.
|
Front to Rear Brake Lines 70 Disc, front to rear brake line
Can$66.00
ZIN7002
Quality lines with correct fittings.
|
Front to Rear Brake Lines / 70 Disc, front to rear brake line
Can$100.00
ZIN7002SS
Quality lines with correct fittings. SS means Stailess Steel construction.
|
Front Brake Line Kits / 70 / Standard drum, 5 line set
Can$105.00
ZKT7001
Quality lines with correct fittings.
|
70 / Standard drum, 5 line set / Front Brake Line Kits
Can$153.00
ZKT7001SS
Quality lines with correct fittings. SS means Stailess Steel construction.
|
Front Brake Line Kits 70 Power disc, 4 line set
Can$105.00
ZKT7002
Quality lines with correct fittings.
|
70 / Power disc, 4 line set / Cougar / Front Brake Line Kits
Can$153.00
ZKT7002SS
Quality lines with correct fittings. SS means Stailess Steel construction.
|
Front Brake Line Kits70 Boss 429, power disc, 4 line set
Can$116.00
ZKT7003
Quality lines with correct fittings.
|
Front Brake Line Kits / 70 Boss 429, power disc, 4 line set
Can$153.00
ZKT7003SS
Quality lines with correct fittings. SS means Stailess Steel construction.
|
Rear Axle Brake Line Sets / 70 / 8" rear axle, 2 line set
Can$52.00
ZRA7002
Quality lines with correct fittings.
|
70 / 8" rear axle, 2 line set / Rear Axle Brake Line Sets
Can$71.00
ZRA7002SS
Quality lines with correct fittings. SS means Stailess Steel construction.
|
Rear Axle Brake Line Sets / 70 / 9" rear axle, 2 line set
Can$52.00
ZRA7003
Quality lines with correct fittings.
|
70 / 9" rear axle, 2 line set / Rear Axle Brake Line Sets
Can$71.00
ZRA7003SS
Quality lines with correct fittings. SS means Stailess Steel construction.
|
