|
64-66 b/u lamp spacer kit
Can$9.75
359972S8
Stamped steel and zinc plated. Mounts on backup lamp housing stud between rear valence and nut. 4 piece set
|
|
Wiring Loom Ties
Can$1.13
376914S
These wire loom ties are found through out the engine compartment. Black nylon. EACH
|
|
64-73 Starter Solinoid (Aftermarket)
Can$15.00
B6AZ11450A
This is a good quality starter solenoid at competitive price.
|
|
1965-70 DOME LAMP ASSEMBLY
Can$40.63
C0AF13A719B
Our dome light assembly is designed to replace the original dome light in a 1967-70 Mustang coupe. We made a bright chrome base with a brighter than original bulb to really improve lighting inside the car. We include instructions on how to easily add this dome lamp to earlier Mustangs that didn't have this feature. Our dome light assembly can even be mounted up under the back deck to make a great trunk light. Our reproduction dome lens and chrome bezel as well as the mounting hardware and electrical connectors are included to make this a quick and simple project.
|
|
64-73 dimmer switch
Can$10.50
C0TZ13A024A
ea
|
|
|
65-66 Turn Signal Switch Repair Kit
Can$16.50
C3DZ13318B
ea
|
|
|
65-67 voltage regulator Autolite no A/C
Can$54.75
C5AF10316B
Silver script. Features the proper cover and original logos. I A S F stamped on cover
|
|
65-66 Turn Signal Switch
Can$60.00
This product is not a copy! Made by the original Ford supplier, this switch is perfect in every way
|
|
65-67 Voltage Regulator (With A/C)
Can$54.75
C5TF10316A
Features the proper cover and original logos. I A S F stamped on cover
|
|
65-66 Headlight Switch Retainer
Can$37.38
C5ZZ11650A
These were previously difficult to find. Made from original factory prints.
|
|
65-68 headlamp switch
Can$33.75
C5ZZ11654B
Made by an OE supplier to Ford.
|
|
|
64-68/70-73 headlamp
Can$28.50
C5ZZ13007A
Reproduction headlamps acid-etched with the FoMoCo logo just as the originals were.
|
|
|
64-66 RH park lamp
Can$42.00
C5ZZ13206B
Complete housings, beautiful chrome, with socket and wiring. Lens sold separately. Bulb not included.
|
|
64-66 LH park lamp
Can$42.00
C5ZZ13207B
Complete housings, beautiful chrome, with socket and wiring. Lens sold separately. Bulb not included.
|
64-66 PARK LITE LENS FOMOCO
Can$8.25
C5ZZ13208
Early 1964.5 Mustangs came with white lenses rather than amber. Will also fit 1965 - 1966 for a custom look. Use with 1157A bulb.
Notes :
With FoMoCo Logo
|
|
64-66 park lamp lens w/o logo
Can$6.00
C5ZZ13208A
Amber lamp lens fit either side of the car. Great detailing. Also includes mounting screws.
Notes :
w/o Fomoco Logo
|
|
|
64-66 park lamp lens gasket
Can$2.62
C5ZZ13211A
pr
|
|
|
64-66 park lamp pads
Can$6.75
C5ZZ13217A
Molded sponge, protects paint from chipping. Pr
|
|
|
64-73 headlamp switch cover
Can$7.50
C5ZZ13533
ea
|
|
|
64-70 license lamp kit
Can$62.25
C5ZZ13550A
Mounts on rear bumper. Good copy of original, includes lens, bulb and correct wiring pigtail
|
|
65-66 door light harness
Can$45.00
C5ZZ13A769A
For Pony and delux interior cars with door lights and/or door speakers.
|
|
64-66 Wiring Loom Mounting Kit
Can$18.75
C5ZZ14000BK
Includes all loom straps, anchors, and clips necessary to correctly install wiring looms. These are excellent reproduction that feature excellent fit with concourse appearance. 21 piece kit
|
|
|
65-68 fog lamp circuit breaker
Can$20.25
C5ZZ15223CB
Mounts under dash, controles voltage for wire protection. Includes primary wire which connects to headlamp switch plug. Instructions included.
|
|
|
65-68 fog lamp pigtail
Can$22.50
C5ZZ15223FGPT
Pigtail wires that connect to bulb and run through housings and plug into the fog lamp feed. Not necessary if purchasing fog lamp housings as pigtails are included.
|
|
|
65-68 fog lamp ground wire
Can$11.25
C5ZZ15223GR
All black wire which plugs into fog lamp pigtail and grounds to rad support.
|
|
|
64-70 b/u lamp lens gasket
Can$3.00
C5ZZ15510A
Molded sponge, good fit. Seals lens to housing. Pair.
|
|
|
64-66 RH b/u lamp housing
Can$42.00
C5ZZ15511A
Great chrome, housings include wiring pigtail. Lenses, gaskets and bulbs sold separately. ea
|
|
|
|
64-66 LH b/u lamp housing
Can$42.00
C5ZZ15512A
Great chrome, housings include wiring pigtail. Lenses, gaskets and bulbs sold separately. ea
|
|
|
64-70 b/u lamp lens
Can$5.25
C5ZZ15514A
Molded white lenses just like originals. Fits either side
|
|
|
64-66 b/u lamp pads
Can$6.00
C5ZZ15533A
Molded Black rubber, good fit. Seals housing to rear valance panel. Pair
|
|
|
64-66 A/C feed harness
Can$49.50
C5ZZ19800ACF
Plugs into main A/C unit under dash, connects to ignition switch and runs through firewall to compressor switch.
|
|
65-66 SEQ LIGHT KIT W/HOUSINGS
Can$333.75
C5ZZSTLDLX
Another new and unique product from Scott Drake. Scott's goal was to provide the classic Mustang with sequential turn signals like the T-birds and Shelby's of the 60's. The inserts alone increase the brightness of the taillamps by 200%. Our sequential light systems come complete with control modules, an electronic variable flasher and 2 dedicated three bulb inserts, ready to install in your taillamp housings. All required electrical connectors are provided. This deluxe kit comes with special polycarbonate lenses. We installed the three bulb inserts into our taillamp housings to make installation just that much easier. Detailed instructions included. Assembly required
|
|
66 starter solenoid
Can$62.25
C6AZ11450A
These are all new, not rebuilt, concourse quality. Features authentic markings and logo. Black case only
|
|
1966 FUEL GAUGE
Can$112.38
|
1966 TEMPERATURE GAUGE
Can$112.38
|
1966 AMP GAUGE
Can$112.38
|
1966 OIL GAUGE
Can$112.38
|
|
66 door light/speaker harness
Can$74.25
C6ZZ13A769A
For Pony and delux interior cars with door lights and/or door speakers.
|
|
66-70 crossover harness
Can$49.50
C6ZZ13A770A
66-70 door speaker cross over loom, to connect LH & RH speakers to radio
|
1966 Alternator Harness (6 Cylinder)
Can$45.00
C6ZZ140566
Attaches to the back of alternator or generator. Plugs into main headlight harness and grounds to the block. Features correct color coded terminal covers for water proofing electrical connections
|
1966 Alternator Harness (8 Cylinder)
Can$45.00
C6ZZ140568
Attaches to the back of alternator or generator. Plugs into main headlight harness and grounds to the block. Features correct color coded terminal covers for water proofing electrical connections
|
1966 Engine Gauge Feed Harness (6 Cylinder)
Can$66.75
C6ZZ142896
Plugs into firewall and connects original style oil pressure sending unit, water temperature sending unit and coil. Also plugs into heater blower motor on 1964 - 1966 cars.
|
1966 Engine Gauge Feed Harness (8 Cylinder)
Can$66.75
C6ZZ142898
Plugs into firewall and connects original style oil pressure sending unit, water temperature sending unit and coil. Also plugs into heater blower motor on 1964 - 1966 cars.
|
64-66 Oil Pressure Extension Lead (With Gauges)
Can$15.00
C6ZZ14289PT
Oil pressure extension lead braided yarn covering w/ gauges
|
1966 Headlight Wiring Harness (With Gauges)
Can$182.25
C6ZZ14290ALL
Connects to firewall near master cylinder and runs along driver side inner fender apron and across radiator support. Connects headlamps, parking lamps, horns, voltage regulator, solenoid and plugs into alternator harness.
|
66 underdash harness
Can$729.00
C6ZZ14401ALL
This is the big one. No core here, because it features all brand new parts, including the fuse block and clips, lamp sockets and all molded plugs. Note: 1964 - 1966 does not include separate wiper harness.
|
1966 Coupe/Convertable Tail Light Wiring Harness
Can$173.25
C6ZZ14405CP
Plugs into main under dash harness and turn signal harness exiting steering column. Runs under left scuff plate and above left wheel well housing. Supplies power to tail lights, license plate light, back up lights, gas tank sending unit and interior quarter panel lamps on fastbacks. Also includes back up light wiring. Features protective outer weave type covering like original.
|
66-67 fog lamp wire kit
Can$91.50
C6ZZ15223FUD
1966-1967 NON G.T. CARS
All 1966 & 1967 non G.T. cars require (C6ZZ15223FUD fog lamp wiring conversion kit & C6ZZ15A214A fog lamp switch) for proper installation.
FOG LIGHT WIRING KITS Early 65 cars and non GT or Pony cars require a conversion kit to operate fog lights. This includes under dash harness, circuit breaker, primary lead, fog light feed wire, 2 ground wires, 2 rad support grommets, wiring diagram and installation instructions. Does not include fog light switch.
|
|
64-66 park lamp kit
Can$82.50
KITELC1
Includes one pair of park lamp housings, pads, lenses, gaskets, bulbs and mounting hardware.
|
|
|
64-66 park lamp install kit
Can$27.75
KITELC2
Includes mounting pads, lenses, gaskets, bulbs and hardware.
|
|
|
64-66 b/u lamp kit.
Can$109.50
KITELC8
This large kit includes backup housings, pads, lenses, gaskets, bulbs and installation hardware.
ea
|
|
|
64-66 b/u lamp install kit
Can$27.75
KITELC9
Hassle free kit makes it easy to install backup lamps. This kit includes mounting pads, lenses, gaskets, bulbs and mounting hardware.
|
|
